Maruzen Type 96 Upgrade Service

Afrocow · #1 02-08-2010, 02:08 PM

Hi, I have a Maruzen Type 96 with the following upgrades:

Laylax Zero Trigger
Prometheus 170% spring
PDI Palsonite Cylinder Set VC
PDI 6.01 495mm tightbore barrel
2 Barrel Spacers
Prometheus hard type bucking

I've spent about $1000 on this sniper and the mag is always loose, the hop up unit is messed up, the bucking is off, sometimes the zero trigger gets stuck, and the accuracy can be horrible occasionally. I've been working on this since the end of summer and haven't been able to play a game with it

I was hoping someone would help me modify this or repair it. I accidentally bought another hop up unit, hard bucking and 6.01 tightbore so if you need spare parts to fix it, I have them. I also have a UTG L96 stock so you can steal some parts off of there if you must.

dman3lax4 · #2 02-08-2010, 02:57 PM

Please do not post a new thread on the same issue, you already have a thread with this exact same information on it, there is no need to post it twice.

Afrocow · #3 02-08-2010, 03:28 PM

If you do not wish to provide upgrade services please do not post on this thread. The thread I had before was under Snipers and I asked questions about my gun and this is under X-Tech so there is relevance.

shakman · #4 02-08-2010, 03:49 PM

dman, please leave the moderation of posts/threads to the official mods/admins of this site. While your efforts do not go unappreciated, it's outside your realm of responsibility as a forum member. Any and all action needed will be handled by the appropriate personnel as needed. Thank you.

Afrocow, 2 things:

1. It's a public thread. People can post on it, and as long as it's within the forum rules and on-topic, it's a valid post.
2. I agree with dman, and this thread is very very similar to your pre-existing thread about this rifle. Yes, it's in a different category, but the original thread started steering towards the problems you're experiencing with this gun. One of the 2 threads will be closed. You choose.

dman3lax4 · #5 02-08-2010, 04:13 PM

My bad. I was simply trying to point out the existence of similar threads, not really trying to moderate it.