|
|
|
>
|
|
Systema Reinforced mechbox version II for M4, and M16-A2.
|
|
|
|
Reviews
|
Views
|
Date of last review
|
|
1
|
651
|
11.4.2004
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
None indicated
|
7.0
|
|
|
|
|
|
supersize
|
|
Description:
|
Systema reinforced mechbox version II for M4, and M16-A2. Uses 6mm bushings (not included).
|
|
Buy From:
|
AirsoftWorx
|
|
|
|
|
Author
|
|
JoeMama
LSA Member
Registered: August 2002
Location: Earth, Milky-Way
Posts: 326
|
|
Review Date: 11.4.2004
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 7
|
|
Pros:
|
Heavier, slightly beefier wall sections than stock TM mechbox
|
|
Cons:
|
Trigger stop design flaw
|
|
While this is a good product for those running stronger springs, it is not as robust as Ver3 mechboxes for example. It is stronger than a stock Ver2 mechbox shell as advertised.
The fit and finish of the mechbox halves is very good, and of course mechbox parts fit in easily.
However, the mechbox shell is not as good as it can be. These are still prone to breaking near the nozzle just like the stock shell over a period of time. What is worse than the stock TM shells is that the trigger stop rib behind the trigger is very thin and not reinforced well at all. When comparing to the TM version, the trigger stop rib is much beefier in the stock shells. This is a disappointing oversight that Systema has still not corrected.
There are pros/cons to this product, but is worthwhile for those wanting to run springs stronger than M130 for a length of time.
|
|
|
|
|
|
|
|
Statistics
|
| Users |
9,121 |
| Products |
1,920 |
| Reviews |
270 |
| Views |
685,868 |
|
| December 2008 |
| Sun | Mon |
Tue | Wed |
Thu | Fri |
Sat | | | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 10 | 11 | 12 | 13 | | 14 | 15 | 16 | 17 | 18 | 19 | 20 | | 21 | 22 | 23 | 24 | 25 | 26 | 27 | | 28 | 29 | 30 | 31 | | | |
|
Random Products - Mechbox Shells
|
ICS Version 2 Gearbox Set
Skizm
|
ICS Gearbox Shell - Version 2
Skizm
|
|
The Community
