|
|
|
·
|
>
|
|
|
|
Reviews
|
Views
|
Date of last review
|
|
2
|
511
|
6.14.2004
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
50% of reviewers
|
$15.00
|
6.5
|
|
|
|
|
|
|
|
Description:
|
Replacment Hop Bucking
|
|
Buy From:
|
AirsoftWorx
|
|
|
|
|
Author
|
|
Dylan098
New Poster
Registered: August 2002
|
|
Review Date: 6.13.2004
|
Would you recommend the product? No |
Price you paid?: $15.00
| Rating: 5
|
|
Pros:
|
The small piece is sufficient for the hopup unit.
|
|
Cons:
|
The larger piece tears and breaks under the stress from the hopup and installation.
|
|
If you are ordering this product to replace the tiny bucking piece, (the one shown in the right in the picture) then you should be fine. But the bigger piece (the piece that fits around the barrel) isn\'t very well made. I have been through about 3 of these and every time i have had the big piece split or tear on me. The plastic must be weaker then the original marui, so if you have the option to, stick to the original marui bucking for your barrel because it probably won\'t break or tear like this one.
|
|
|
|
JoeMama
LSA Member
Registered: August 2002
Location: Earth, Milky-Way
Posts: 326
|
|
Review Date: 6.14.2004
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 8
|
|
Pros:
|
Includes the small rubber cylinder; durable
|
|
Cons:
|
Seems a bit thicker than the stock TM piece
|
|
I\'ve used a couple of these and did not find them to be any worse or better than the stock Tokyo Marui parts. The hopup bump on the inside wall of the bucking seems harder than the stock TM feature, so I noticed I didn\'t need to dial up the hopup as far.
As far as installation and durability, I did not have any issues. Just make sure to lube up the bucking and barrel to ensure it slides on easily. As for part life, I had one of these in a M249 PGC-mod, and it lasted the better part of 40,000 rounds at 430+fps, so it is not a subpar product compared to other hopup buckings. It was fairly worn, but looked like it could have lasted longer. I threw it out since I was rebuilding the gun anyway.
|
|
|
|
|
|
|
|
|
Statistics
|
| Users |
9,121 |
| Products |
1,920 |
| Reviews |
270 |
| Views |
685,768 |
|
| December 2008 |
| Sun | Mon |
Tue | Wed |
Thu | Fri |
Sat | | | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 10 | 11 | 12 | 13 | | 14 | 15 | 16 | 17 | 18 | 19 | 20 | | 21 | 22 | 23 | 24 | 25 | 26 | 27 | | 28 | 29 | 30 | 31 | | | |
|
Random Products - Tightbore Barrels and Hopup Parts
|
Systema NEW BS BARREL SG550
petez08
|
Classic Army M4A1/M16 Metal hopup unit
airsoft
|
|
The Community
