SnipeDefender
09-09-2003, 10:50 PM
how to make your own AEG silencer??
The outer barrel is 1 in. diameter, so i got a 1/2 in diameter copper pipe and cute holes all allong the sides of it. i then wrapped each end with duct tape to build that up to a snug fit inside the 1 in diameter outer tube. Then i cut a fitting piece of wire mesh and using 1/4 in strips of duct tape, taped it around the pipe with the holes in it. (this is to keep any silencing foam from entering the barrel) Finally i wrapped the barrel in a small amount of Motercycle exaust pipe silencing foam, duct taped arond the foam and twisted and pushed the silencer insert into the 1 in diameter copper pipe.
Next spray paint matt black or whatever color you desire and your finished
put up a post if you want instructions on how to connect it to the gun... it varries with different models.
any questions i can help you with?
The outer barrel is 1 in. diameter, so i got a 1/2 in diameter copper pipe and cute holes all allong the sides of it. i then wrapped each end with duct tape to build that up to a snug fit inside the 1 in diameter outer tube. Then i cut a fitting piece of wire mesh and using 1/4 in strips of duct tape, taped it around the pipe with the holes in it. (this is to keep any silencing foam from entering the barrel) Finally i wrapped the barrel in a small amount of Motercycle exaust pipe silencing foam, duct taped arond the foam and twisted and pushed the silencer insert into the 1 in diameter copper pipe.
Next spray paint matt black or whatever color you desire and your finished
put up a post if you want instructions on how to connect it to the gun... it varries with different models.
any questions i can help you with?