PDA

View Full Version : KM vs. Prometheus inner barrels?



Kilo
07-06-2005, 09:54 PM
Anyone had experience with these two tightbore barrels and care to share about pros and cons?

Kilo

AustinWolv
07-06-2005, 10:33 PM
I've only had KM and Systema barrels. They shoot straight. ;)

Once the FAQ gets back up and running, there is a question that addresses your very questions.

Summary: KM doesn't offer twice as good performance as Systema barrel to warrant double the cost, but doesn't get as dirty as fast. Prometheus is tighter bore and good barrel, but supposedly likes specific hopup buckings.....or something like that.....I cannot recall at the moment. Otherwise, the hopup doesn't work right and the barrel looks like the culprit, but really isn't.

Marimba
07-06-2005, 10:52 PM
I have used the Systema 6.04 and Prometheus 6.03. I did prefer the Prometheus, but mostly because I thought it was easier to clean. I used the same Guarder clear hop-up bucking with both barrels and had no problems.

Kilo
07-07-2005, 09:10 PM
So does anyone think I will have a problem with putting a Prometheus in my S-system?

AustinWolv
07-07-2005, 11:10 PM
Nope.

Marimba
07-08-2005, 12:20 AM
Just do it.

Kilo
07-08-2005, 01:52 PM
Anyone know the barrel length to get?

AustinWolv
07-08-2005, 02:00 PM
For the M4S, right? Should be 363mm (look for M4 length), unless you are trying to extend it through the silencer.

Marimba
07-08-2005, 02:20 PM
Measure the one you have, or contact Agro to determine the length you currently have.

HammerHead
07-08-2005, 02:20 PM
FYI: Leudog is selling a 363mm Systema inner on eBay. There's a classifieds entry for it with a link to the auction.

Kilo
07-08-2005, 04:36 PM
Guys, you rock!!!

Thanks for all the help on this!

Contacted Luedog...he's got the 363mm Prometheus for me!

Thanks fellas!!!!!!!!