PDA

View Full Version : custom aeg's m16 series or g3 series



delta gunner
09-05-2004, 03:46 PM
i am a custom gun maker / ideas for custom guns , i want to start a custom gun store in texas so i need your ideas to make this operation ,if you have cool paint jobs that counts as sort of custom

skitelluride531
09-05-2004, 04:37 PM
Sorry, a little confused here. What are you asking for?

delta gunner
09-05-2004, 04:39 PM
i would like to have some ideas or pictures of custom aeg's

benc64
09-05-2004, 05:33 PM
Many custom AEG's can be found here:
Redwolf Airsoft Custom AEG's (http://www.redwolfairsoft.com/redwolf/airsoft/Category?menu1=1)
Although it would be kind of unoriginal to use their designs, but I guess you could come up with ideas from them.
Here is a custom paint job:
skitelluride's M4 in MARPAT (http://www.austinairsoft.com/forums/photopost/showphoto.php?photo=1285&sort=1&cat=2&page=1)
If you peruse the photo gallery section of this website you can find many custom guns and paint jobs.

delta gunner
09-05-2004, 05:39 PM
i have redwolf as one of my favorites i have seen all there custom guns , also i have looked at all the ones at this site too sorry not exactliy what i am looking for

skitelluride531
09-05-2004, 05:55 PM
i have redwolf as one of my favorites i have seen all there custom guns , also i have looked at all the ones at this site too sorry not exactliy what i am looking for
What are you looking for then? You are being a little vague....

Painted Weapons Thread: http://www.airsoftplayers.com/forum/topic.asp?TOPIC_ID=93


I am sort of confused on what you want...are you looking for ideas for customs guns that you will be making? Do you have any past experience with creating 'custom' guns?

Mack4
09-05-2004, 05:57 PM
I want a FN Fal. http://world.guns.ru/assault/as24f-e.htm
There is only a few of these in an airsoft form in existance today
http://www.planetairsoft.net/article-smokeysinterview.htm
http://www.geocities.com/guru7mm/Armoury21
-Mack

skitelluride531
09-05-2004, 06:02 PM
As for what I want, I'll take a VSS Vintorez :D .

delta gunner
09-05-2004, 06:06 PM
i want to see some ideas from anyone , new custom guns like a week old or newer

delta gunner
09-05-2004, 06:16 PM
thanks for the cool paint jobs "ski"

Mack4
09-05-2004, 07:13 PM
http://www.steyr-aug.com/acr2002.htm
freaky AUG
-Mack

Agrovale
09-05-2004, 08:36 PM
Just wondering why you would open a store in Texas when you are from California?

I'll take a UMP.

AustinWolv
09-05-2004, 09:14 PM
Can you do a M240B? I'll take one of those, along with PKM. Oh, I'd like a BAR too.

benc64
09-05-2004, 11:00 PM
I'll have an MK19 automatic grenade launcher, pretty please! :)

Arsenic
09-06-2004, 12:04 AM
Oh yes...defenitly a 240B and a MK19. I'd love to see that!

delta gunner
09-06-2004, 11:39 AM
i will make customized guns that are already out like tokyo mauri aeg's or western arms pistols , i cant make all new guns because i dont know how to enginer them "sorry"

delta gunner
09-06-2004, 11:41 AM
what was this topic about ,the customized m16 series or g3 series aeg's

Mack4
09-06-2004, 12:56 PM
Could you make me an RPK, M16 or HK support weapon?
-Mack

delta gunner
09-06-2004, 01:26 PM
yes you can make a colt or hk support weapon buy a dual drum mag , no kalishnikov guns in topic

Bstann
09-06-2004, 01:32 PM
[QUOTE=delta gunner]yes you can make a colt or hk support weapon buy a dual drum mag , no kalishnikov guns in topic[/QUOTE

Adding a drum mag does not magically turn a weapon into a support weapon.

delta gunner
09-06-2004, 01:35 PM
you need an m16a2 ,a3 on g3 sg 1 ,g3a3 it takes a long gun to make a support weapon

Bstann
09-06-2004, 01:41 PM
you need an m16a2 ,a3 on g3 sg 1 ,g3a3 i takes a long gun to make a support weapon

You can not make a support weapon from any of those AEG's. The only kit Support weapon available is the RPK kit which is currently out of production. All others are made specifically as support weapons by manufactures such as TOP.


http://www.austinairsoft.com/forums/showthread.php?t=5285&highlight=support+weapon

delta gunner
09-06-2004, 01:51 PM
you still are not on the topic i started it was custom m16 or g3 ,custom paint jobs for them

Bstann
09-06-2004, 02:07 PM
you still are not on the topic i started it was custom m16 or g3 ,custom paint jobs for them

You yourself chose to go off topic.


i will make customized guns that are already out like tokyo mauri aeg's or western arms pistols

When someone else asked about support weapons you stated,

yes you can make a colt or hk support weapon buy a dual drum mag , no kalishnikov guns in topic This appears as another off topic answer that you yourself made.

You then stated
complete answer
you need an m16a2 ,a3 on g3 sg 1 ,g3a3 it takes a long gun to make a support weaponIf you don't like peoples responses to your statement, you are free to wander your Delta wannabe self somewhere else.

delta gunner
09-06-2004, 02:13 PM
the support weapon part was on topic and the weastern arms pistols , kalishnikov weapons were the off topic things "delta force rules they the ones who stopped the iraqi's"

Bstann
09-06-2004, 02:18 PM
the support weapon part was on topic and the weastern arms pistols , kalishnikov weapons were the off topic things "delta force rules they the ones who stopped the iraqi's"

When you choose to respond in a manner that I can understand I will again show that you your self took this off topic.

I seem to remember that there were other units in Iraq besides Delta? Maybe I'm wrong. When I was in Iraq during the first one I seem to remember seeing these people also. Must have been my mistake.

delta gunner
09-06-2004, 02:29 PM
for bstann the ps2 game conflict desert storm 1 & 2 are how i know the delta force were in iraq in 1990

Arsenic
09-06-2004, 02:31 PM
Perhaps you should get your head out of video games and join the real world. Of course....we all know video games are ALWAYS accurate right?

Bstann
09-06-2004, 02:33 PM
for bstann the ps2 game conflict desert storm 1 & 2 are how i know the delta force were in iraq in 1990

Damn, then it must be the truth. Delta did win Iraq for us.

DG, I think you should step back and put some thought into it before you post this drivel.

Bear
09-06-2004, 02:36 PM
OK, maybe it's just me, but DG I can't understand a word you're saying. Try using proper grammar, spelling, puncuation, and articulation and perhaps you'll get some worthwhile responses from the community. Just my two pesos.

Mack4
09-06-2004, 02:39 PM
http://www.securityarms.com/20010315/galleryfiles/orig/m16a2lmg.htm
This is a Colt LMG
http://www.remtek.com/arms/hk/mil/21/21.htm
This is a HK21e
Could you make a body kit for either of these weapons?
-Mack

Arsenic
09-06-2004, 02:40 PM
Ok this is the way I see it. There are more then enough custom gun makers out there already. Perhaps you should open up a store front and make a name for yourself before anyone will really take you seriously. Not too many people are going to buy a "Custom" AEG from someone they dont even know.

Just my opinion though...I could be wrong.


And one more thing.....I wouldnt base your facts on Iraq from the info you get off of a video game. It just makes you look like an idiot.

delta gunner
09-06-2004, 02:41 PM
bear and bstann you should stop messing up the topic with your delta bashing and your statistics about bad grammer

Bstann
09-06-2004, 02:42 PM
http://www.securityarms.com/20010315/galleryfiles/orig/m16a2lmg.htm
This is a Colt LMG
http://www.remtek.com/arms/hk/mil/21/21.htm
This is a HK21e
Could you make a body kit for either of these weapons?
-Mack


Neither of these qualifies as a support weapon at this time.

delta gunner
09-06-2004, 02:44 PM
sorry thats not the same as what i ment m16 and g3 with dual drum mag is what i ment

Bstann
09-06-2004, 02:46 PM
bear and bstann you should stop messing up the topic with your delta bashing and your statistics about bad grammer

Delta bashing? I think this was more of DG bashing. I have the utmost respect for all members of our military, past and present.

Bstann
09-06-2004, 02:47 PM
Enough of this Thread.

AustinWolv
09-06-2004, 05:48 PM
i will make customized guns that are already out like tokyo mauri aeg's or western arms pistols , i cant make all new guns because i dont know how to enginer them "sorry"
In other words, you can't do anything of value beyond what a basic Airsoft player can do on their own with the available parts already on the market.